Fusion Apollo Monoblock Marine Amplifier (650-watt RMS)

It’s the difference between hearing the music and feeling it. These efficient, easy-to-install amplifiers work with your compatible Fusion stereo system1and let you choose from monoblock, multichannel and zone amplifier options.FeaturesKeep the music going for longer without draining your battery as quicklyNo more manual adjustments to your audio settings. The Easy Tune feature does it for youA glance at the LED indicators lets you identify if the amplifiers have a short or if theyre overheatingThese amps have less distortion and noise, so you enjoy quality audioMounting brackets are included for simple installationDont worry about potential overheating damage with our ignition protection design2000-WATT MONOBLOCK AMPLIFIERAdd extra power to your system with this 2000-watt (650-watt RMS) monoblock amplifier thats specifically designed to power a subwoofer.POWER AND EFFICIENCYThe Apollo amplifiers are designed to produce impressive power with less drain on your battery. The monoblock produces 650-watt RMS and the 4/6/8 channel amplifiers produce 150-watt RMS per channel.EASY TUNE FEATUREThese amplifiers use the Easy Tune feature2, which automatically regulates audio settings. So, you can get the best quality sound without making manual adjustments.LESS DISTORTIONSome amplifiers distort audio when they add power. Ours are specifically designed with minimal distortion and noise, so you can enjoy high-quality audio, even at higher volumes.LED INDICATORSIdentify electrical issues at a glance. These indicator lights will show you issues with electrical currents and shorts as well as temperature.MOUNTING BRACKETSEasily install the amplifiers on board with the included mounting brackets.IGNITION PROTECTEDThe ignition protected design helps prevent potential damage from overheating.CONFORMAL-COATED PCBSThe amplifiers circuit board has been specially coated to provide extra protection from the marine elements.2 OHM STABLEYou can connect up to two speakers per channel, increasing setup options.FUSION TRUE-MARINEDESIGNThe amplifiers are designed to last season after season. They have been tested to a high level of protection against salt fog, temperature, vibration and UV.In the BoxOne Apollo monoblock amplifierOne mounting bracketOne power connectorOne speaker connectorFour 8-gauge, flat head self-tapping screwsFour 8-gauge, pan head self-tapping screws (for mounting bracket)Four screw coversMounting templateInstallation instructionsImportant safety and product information (ISPI)SpecificationsPhysical dimensions without bracket (LxWxH)Monoblock/4 Channel: 9.25 x 7.06 x 1.75 (235 x 180 x 45 mm)6 Channel: 11.69 x 7.06 x 1.75 (297 x 180 x 45 mm)8 Channel: 14.13 x 7.06 x 1.75 (359 x 180 x 45 mm)Zone: 3.94 x 3.94 x 1.57 (100 x 100 x 40 mm)Physical dimensions with bracket (LxWxH)Monoblock/4 Channel: 9.25 x 7.06 x 2.13 (235 x 180 x 50 mm)6 Channel: 11.69 x 7.06 x 2.13 (297 x 180 x 50 mm)8 Channel: 14.13 x 7.06 x 2.13 (359 x 180 x 50 mm)Zone: 3.94 x 4.53 x 1.89 (100 x 115 x 48 mm)WeightMonoblock/4 Channel: 4.85 lb (2.2 kg)6 Channel: 5.95 lb (2.7 kg)8 Channel: 6.94 lb (3.15 kg)Zone: 1.01 lb (460 g)Water ratingMonoblock/4/6/8 Channel: IPX2Zone: IPX7Amplifier classClass-DCEA-2006 power ratingMonoblock: 650 watt RMS x 1 @ 14.4 V input – 4 ohm < 1% THD4 Channel: 150 watt RMS x 4 @ 14.4 V input - 4 ohm < 1% THD6 Channel: 150 watt RMS x 6 @ 14.4 V input - 4 ohm < 1% THD8 Channel: 150 watt RMS x 8 @ 14.4 V input - 4 ohm < 1% THDZone: 20 watt RMS x 2 @ 14.4 V input - 4 ohm < 1% THDTotal rated power output - 2 Ohm (Watts)Monoblock: 1100 watt RMS x 1 @ 14.4 V input - 2 ohm < 1% THD4 Channel: 290 watt RMS x 4 @ 14.4 V input - 2 ohm < 1% THD6 Channel: 290 watt RMS x 6 @ 14.4 V input - 2 ohm < 1% THD8 Channel: 290 watt RMS x 8 @ 14.4 V input - 2 ohm < 1% THDZone: 30 watt RMS x 2 @ 14.4 V input - 2 ohm < 1% THDTotal rated power output - 4 Ohm Bridged (Watts)4 Channel: 580 watt RMS x 2 @ 14.4 V input - 4 ohm Bridged < 1% THD6 Channel: 580 watt RMS x 3 @ 14.4 V input - 4 ohm Bridged < 1% THD8 Channel: 580 watt RMS x 4 @ 14.4 V input - 4 ohm Bridged < 1% THDPeak power (Watts)Monoblock: 2000 watts4 Channel: 1200 watts6 Channel: 1800 watts8 Channel: 2400 wattsZone: 140 wattsInput sensitivityMonoblock: 2.15 V RMS4/6/8 Channel: 1.6 V RMSZone: 0.45 V RMSInput impedanceMonoblock/4/6/8 Channel: 22k ohmZone: 9k OhmOperating voltageMonoblock/4/6/8 Channel: 10.8 V - 16 V DCZone Amplifier: 10.8 V - 32 V DCCurrent draw, in standby/off using AMPLIFIER ON wireMonoblock/4/6/8 Channel: < 5 mA @ 14.4 V inputZone: < 1 mA @ 14.4 V inputCurrent draw, on, no audioMonoblock: < 1.15